Hot Dipped Galvanized Metal Stud and Track Drywall Metal Stud

• After-sales Service: Yes
• Warranty: Yes
• Type: C Channel, U Channel, Wall Angle, Furring
• Standard: GB
• Shape: C Channel
• Perforated: Perforated
• Model NO.: Metal Stud
• Length: 3000mm
• Material: Galvanized Sheet,Galvanized Steel
• Zine Coted: GB:80g--275g; ASTM:G60-G90
• Height: 25/30/32/35/40mm
• Width: 50/65/70/90/100mm
• Thickness: 0.45~1.0mm
• Function: Fireproof, Waterproof, Rustproof, Heat Insulation,
• Application: Partition and Ceiling System
• Certificate: ISO,Ce,Ucs,Iaf,CNAS
• Transport Package: Bundle Packing: 10PCS/Bundle or 20PCS/Bundle
• Trademark: TITAN
• Origin: China
• HS Code: 7216910000
• Production Capacity: 300000 Piece/Pieces / Month

Product Description

Main Characteristic
1.Galvanized Zinc coating will protect the channel from being rust; 
2.Flexibility of application makes each ceiling tile/plasterboard easily installed anddisconnected;
3.Size adjustability can easier to match your request;
4.High quality leads longer life span & higher strength;
5.Better function of dealing with both high tensile stress and blending stress.
6. Easy and fast for installation,time-saving. 

Partition Installing Method

 

1. Galvanized Metal Frame

a.The top and bottom keels are fixed respectively top floor and on floor with expansion bolts.

b.The vertical keel should be aligned well according to the requirement (generally being 612 mm) with

laterally supporting keel installed.

 

2. Board Material Package Fixed

a.Cutting the board material to the dimensions needed (about 10mm lower than wall height)

b.Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally

about 200~250mm with screws sinking 0.5mm under the board face.

c.The expansion seam of about 4mm between boards should be kept.

d.The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously

to avoid generating inner stress to make board material bucking.

e.Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled.

Ceiling Installing Method

 

1.Carry out ceiling line-measuring to determine the ceiling's fixed position, the boom's central range is generally 1200.

2.Connect and fix the boom and main keel with hanging piece to make the main keel keep level position.

3.Vertically fix the sub-keel to the main keel with hanging piece; the sub-keel axis'central range is 612mm.

4.Install the laterally supporting keel properly, its central ranges is 1224mm.

5.Fix the board on sub-keels with tapping screws, and to well the seam-connecting treatment.

 

Notice:

The hanging system of TITAN board combined with light steel keel is divided into two kinds of person-standing type

and non person-standing type; for the non person-standing type,only consider the self-weight of ceiling and light.Lamp

 

without loading other loads; for the person-standing type. Consider about 80~100kg load when someone repaired it.

 

Ceiling System Proportion
Gypsum Board  1200×2400×9mm	1 m^2
Main Runner	1 m
Cross Runner	3~3.6 m
Hanger	2~3 pcs
Main Runner Connector	0.5 pcs
Cross Runner Connector	1 pcs
Leveling	4~6 pcs
Sleeve Anchor	1 set
Cross Screw	1 set
Drywall Self Tapping Screw	25~30 pcs
Paper Joint Tape / Mesh Joint Tape	1.5~2 m
Partition System Proportion
Gypsum Board  1200×2400×12mm	2 m^2
Metal Stud	2.2~3.6 m
Metal Track	0.7~1.4 m
Intermediate Channel	0.8~1.4 m
Support Card	4 pcs
Drywall Self Tapping Screw	25~30 pcs
Paper Joint Tape / Mesh Joint Tape	1.5~2 m